Continuously working tape applicator type 494-FAS

Continuously working tape applicator for the automatic application of tapes on the joints when producing endless narrow/wide abrasive belts.

Thanks to the tape applicator type FAS, the tape will be automatically glued, dried and applied to the lap end. The process can be finished with a flush-cut.

  • For tape widths up to 25 mm.
  • Automatic gluing and coating system.
  • Drying of the tape with two drying elements.
  • Flush-cut possible.
  • Cutting angle is adjustable.
  • Adhesive container in different sizes available.
  • Extension of inserting stretch for wide belts (approx. 1500 mm).
  • Working direction from right to left (standard).
  • Designed for joint direction AL (see pictures).
  • Two steel feet for a working height of approx. 1020 mm.
  • Machine frame with two-speed drive (approx. 0.1 m/sec and 0.2 m/sec).
  • The tape is automatically applied on the lap end after the lap is glued and dried to guarantee an immediate adhesion.
  • The cutting angle is adjustable, so that all common joint angles can be prepared.
  • The tape can be cut flush with the belt edge or in order to facilitate the positioning in the press a piece of the tape may protrude.
  • The machine works with a fixed speed to allow a time-controlled cut.

Cutting head of tape applicator type FAS

Cutting head of tape applicator type FAS

Tape coater with adhesive container

Tape coater with adhesive container

Joint directions for tape applicator

Joint directions type AL and AR (seen from the grain side). Recommended: type AL

How may we help you?

Contact us! Our experts will be happy to support you.

Tel. +41 52 720 70 30
info@amackerschmidag.com