• For roll width from 1650 mm to 2100 mm (depending on roll slitter type).
• Unwind station for rolls up to ø750 mm (optionally up to ø1250 mm).
• Pneumatic knife system type KK (crush cut).
• Variable speed drive up to approx. 100 m/min.
• Cutting cylinder laterally movable by hand
  (automatically on request).
• Web tension individually adjustable for each shaft.
• Main drive 11 kW or 17 kW.
• Rewind station for rolls up to ø500 mm.

• Unwind station for rolls up to ø750 mm (optionally for rolls up to ø1250 mm).
• The unwind station is separated from the machine for an easier access and inserting of the roll.
• Unwinding with various systems possible:
  – with square shaft 32/32 mm
  – with square shaft 40/40 mm
  – with pneumatically expandable unwind shaft for cores with ø75 mm.
• Pneumatically adjustable unwind brake.
• Automatic edge guiding system optionally available.

Options:

• Unwind station for rolls up to ø1250 mm.
• Pneumatically expandable unwind shaft for cores with ø75 mm.
• Automatic edge guiding system.
• Automatic and contactless brake control type AV.

• Pneumatic knife system type KK.
• Cutting pressure up to 160 kp per knife holder or alternatively up to 210 kp.
• Cutting pressure is adjustable by a regulator
  (individual pressure regulation on request).
• Each knife can be switched on or off on its own.
• Further information can be found on the separate page for knives, knife holders and fixed knife sets.

Options:

• Electric cross cutter (installed after the knives).

• Cutting cylinder laterally movable by hand
  (automatically on request).
• Cutting cylinder diameter 300 mm (hardened steel).
• Main drive 11 kW or 17 kW (when working with many knives or a flex station).
• Variable speed drive up to approx. 100 m/min.

Options:

• Automatic oscillator (cutting cylinder) instead of manual shifting.

• Rewind station for rolls up to ø500 mm.
• Two swiveling, mechanically expandable rewinding shafts for cores with ø75 mm and slots for winding without sleeve.
• Rewinding with grain outside (optionally with reversible drive).
• Web tension separately adjustable for both shafts.

Options:

• Reversible rewind drive for winding with grain outside or inside.

• Unwind station for rolls up to ø1250 mm.
• Pneumatically expandable unwind shaft for cores with ø75 mm.
• Automatic edge guiding system.
• Automatic and contactless brake control type AV
• Electric cross cutter installed after the knives.
• Automatic length measuring device
  to stop the machine after the pre-selected length is reached.
• Reversible rewind drive for winding with grain outside or inside.
• Automatic oscillator (cutting cylinder) instead of manual shifting.
• Flex station with two flex bars and freely adjustable pressure.