• Roll width of 1650 / 1850 / 2050 mm.
• Maximum roll diameter of 750 mm (larger diameters on request).
• Many options available
  – several unwind shafts.
  – shaft supports (bearing).
  – drive/feeding.

• Type HO
  with fixed unwind shaft with sleeve and collars (on request).
• Type KB
  with flap bearings for pneumatically expandable unwind shaft or square shaft with cones and manually adjustable mechanical brake (on request).
• Type KP
  with flap bearings for pneumatically expandable unwind shaft or square shaft with cones and pneumatic brake.
• Several unwind shafts for type KB or KP available.
  – square shaft 40/40 mm with two expanders for sleeves (included).

Options:

• Unwind shafts for type KB or KP
  – square shaft 32/32 mm with 2 expanders for sleeves.
  – pneumatically expandable unwind shaft for cores with ø75 mm.
  – 2 cones for rolls with a square shaft core (for 40/40 or 32/32mm shafts).

• Unwind shafts for type KB or KP (on request)
  – square shaft 32/32 mm with 2 expanders for sleeves.
  – pneumatically expandable unwind shaft for cores with ø75 mm.
  – 2 cones for rolls with a square shaft core (for 40/40 or 32/32mm shafts).
• Automatic brake control type AV
  Automatic brake control according to the roll diameter (the pneumatic brake type KP is required).
• Partial feeding type TV
  Partial feeding of the material through the cutting machine. This option is recommended for cut-to-length machines, which are working by hand. Feeding length is adjustable (time-controlled). For a smooth operation type AV and type KP are recommended.