Accessories: Knives, knife holders, fixed knife sets

Discover our wide range of knives, blades, knife holders and fixed knife sets for the different cutting systems.

  • Knives for crush cut system (straight cut as well as wave cut).
  • Knives for shear cut system (straight cut).
  • Blades for guillotine cut (straight cut as well as wave cut).
  • Mechanical knife holders and pneumatic knife holders.
  • Fixed knife sets.

Knives for straight cut

Knives for straight cut

Knives for crush cut system (straight cut)

  • Knife type 100/40/2
    Outside diameter 100 mm, center 40 mm, knife thickness 2 mm.
    For use with: Knife holder type KK-15-F, KK-25-F, KK-25-P.
  • Knife type 100/40/1
    Outside diameter 100 mm, center 40 mm, knife thickness 1 mm.
    For use with: Knife holder type KK-15-F, KK-25-F, KK-25-P.
  • Knife type 130/40/2
    Outside diameter 130 mm, center 40 mm, knife thickness 2 mm.
    For use with: Knife holder type PK-30-P, KK-30-P, knife set, WSQ, HQ, HQP.
  • Knife type 130/40/1
    Outside diameter 130 mm, center 40 mm, knife thickness 1 mm.
    For use with: Knife holder type PK-30-P, KK-30-P, knife set, WSQ, HQ, HQP.
  • Knife type 128/45/8
    Outside diameter 128 mm, center 45 mm, knife thickness 8 mm in the center.
    For use with: Knife holder type KK-50-P.
  • Knife type 80/26/8
    Outside diameter 80 mm, center 26 mm, knife thickness 8 mm in the center.
    For use with: 242/19, 252/19, 262/19, 272/19.

Knife for wave cut

Knife for wave cut

Knives for crush cut system (wave cut)

  • Knife type 90/50/3
    Outside diameter 90 mm, center 50 mm, knife height 3 mm, wave distance 12 mm, knife thickness 0.75 mm.
    For use with: Knife holder type KK-25-F, KK-25-P.
  • Knife type 20800
    Outside diameter 130 mm, center 50 mm, wave height 8 mm, wave distance 20 mm, knife thickness 1 mm (0.75 mm on request).
    For use with: WSQ, HQ, HQP, ARGW.
  • Knife type 14400
    Outside diameter 130 mm, center 50 mm, wave height 4 mm, wave distance 14 mm, knife thickness 1 mm.
    For use with: WSQ, HQ, HQP, ARGW.

Knife for shear cut system

Knife for shear cut system

Knife for shear cut system (straight cut)

  • Type ST-008
    For use with: Cut-to-length machine type HT, HTB, HTBP, HTP, ST.

Blades for guillotine cut

  • Straight cut
    For use with: Cut-to-length machine type SGW.
  • Wave cut
    For use with: Cut-to-length machine type SGW.

    Blade for straight cut

    Blade for straight cut

    Blades for wave cut

    Blades for wave cut

Mechanical knife holder type KK-15-F

Mechanical knife holder type KK-15-F

Knife holders for crush cut system

  • Knife holder type KK-15-F
    – Mechanical.
    – Minimum cutting width 15 mm.
    – For all common materials.
    – Knife type 100/40/2, 100/40/1 for straight cuts.
    – Mechanical clamping system on the knife holder shaft.
    – For use with:
    BTK-247, BTK-248, BTB-262, BTB-272, BTV-295, RSZ, RSZB, RSE, RKK, RKZ, …
  • Knife holder type KK-25-F

    Mechanical knife holder type KK-25-F

    Mechanical knife holder type KK-25-F

    – Mechanical.
    – Minimum cutting width 25 mm.
    – For all common materials.
    – Knife type 100/40/2, 100/40/1 for straight cuts.
    – Knife type 90/50/3 for wave cut.
    – Mechanical clamping system on the knife holder shaft.
    – For use with:
    BTK-247, BTK-248, BTB-262, BTB-272, BTV-295, RSZ, RSZB, RSE, RKK, RKZ, …

  • Knife holder type PK-30-P
    – Pneumatic.

    Pneumatic knife holder type PK-30-P

    Pneumatic knife holder type PK-30-P

    – Minimum cutting width 30 mm.
    – For all common materials.
    – Knife type 130/40/2, 130/40/1 for straight cuts.
    – Pneumatic clamping system on the knife holder shaft.
    – For use with: RSEB, …

  • Knife holder type KK-30-P
    – Pneumatic.
    – Minimum cutting width 30 mm.
    – For coarse materials (Polyester/Fiber).
    – Knife type 130/40/2, 130/40/1 for straight cuts.
    – Mechanical clamping system on the knife holder shaft.
    – For use with: RSE, RKK, RSR, …
  • Knife holder type KK-50-P

    Pneumatic knife holder type KK-30-P and KK-50-P

    Pneumatic knife holder type KK-30-P and KK-50-P

    – Pneumatic.
    – Minimum cutting width 50 mm.
    – For very coarse materials (Polyester/Fiber).
    – Knife type 128/45/8 for straight cuts.
    – Mechanical clamping system on the knife holder shaft.
    – For use with: RSE, RSR, …

  • Knife sets with 1 pair of knife set holder

    Knife sets with 1 pair of knife set holder

    Fixed knife sets
    – Maximum knife set width 310 mm (for belt width <15/25 mm). - For all common materials. - Knife type 130/40/2, 130/40/1 for straight cuts. - Quick-change system for each knife set. - Only 1 pair of knife set holder for various knife sets needed. - For use with: BTK-247, BTK-248, BTB-262, BTB-272, RKK, RKZ, ...

How may we help you?

Contact us! Our experts will be happy to support you.

Tel. +41 52 720 70 30
info@amackerschmidag.com