Stock machines

The machines listed below are available right away from stock.

Your benefits at a glance:

  • Available right away from stock.
  • New machines recently produced.
  • Swiss quality.
  • Spare and wear parts supply guaranteed.
  • Comprehensive service and support.

Interested?
Contact us for further detail. It would be our pleasure to submit an offer or answer your questions.
E-Mail: info@amackerschmidag.com

How may we help you?

Contact us! Our experts will be happy to support you.

Tel. +41 52 720 70 30
info@amackerschmidag.com

Cutting machine type WSQ with unwind station

Cutting machine type WSQ with unwind station
  • Cutting length up to 1850 mm.
  • Crush cut system for straight cut and wave cut.
  • Cutting angle adjustable between 90° and 45°.
  • Unwind station type 363 with automatic partial feeding included!

Slitter for belts and sleeves type BTK-248

Slitter for belts and sleeves type BTK-248
  • Maximum working width up to 360 mm.
  • Mechanical knife system type KK or fixed knife sets.
  • Short belt stretcher (ø45 mm)
    with hand-operated belt guiding for belts of 310 … ≈1800 mm and hand wheel for precise adjustment of belt position.
  • Cut end automatic type SEA
    that lift off the knives after the cut (time-controlled).

Cut-to-length machine type HTBP with unwind station

Cut-to-length machine type HTBP with unwind station
  • Maximum cutting length 500 mm – pneumatic cutting.
  • Shear cut system for straight cuts (no wave cuts possible).
  • Cutting angle adjustable between 90° and 45°.
  • Unwind station type TVK with automatic partial feeding is included!

Roll slitter for narrow rolls type RKS

Roll slitter for narrow rolls type RKS
  • Roll width up to 620 mm.
  • Shear cut knife system consisting of upper and lower knife.
  • Unwind station for roll diameters up to 750 mm.

Punching machine type SSZ

Punching machine type SSZ
  • For rolls up to ø600 mm
  • For discs of ø90 … 300 mm and sheets up to 280 mm
  • Shear cut punching tools
  • Discs/sheets with or without center hole as well as with or without suction holes

Roll slitter type RSZB

Roll slitter type RSZB
  • Roll width up to 1650 mm (maximum working width 1600 mm)
  • Knife system KK for knife holder type KK-25-F (Crush cut)
  • Wave cut as well as straight cut possible
  • Pneumatically expandable unwind shaft and rewind shafts

Belt press type PP-18

Belt press type PP-18
  • Press force adjustable up to 18 tons.
  • Maximum press length 500 mm.
  • Two-hand control with belt clamp.
  • Tongue for pressing very short belts.

Belt press type HP-40

Belt press type HP-40
  • Hydraulic belt press.
  • Maximum press length 900 mm.
  • Press force adjustable up to 40 tons.
  • Upper press bar width 30 mm,
    lower press bar width 40 mm.

Skiving machine type SKZ-219/2/500

Skiving machine type SKZ-219/2/500
  • Maximum joint length 500 mm.
  • Mechanical clamping device.
  • Table is moved by hand from right to left.
  • Equipped with one aggregate (further aggregate with diamond cup wheel on request)