Automatic cut-to-length machine type VM

Automatic cut-to-length machine type VM for rolls up to ø700 mm. Depending on the cutting machine, the VM can be equipped with a guillotine cutting machine or a crush cut cutting machine for straight cuts and/or wave cuts.

The machine consists of an unwind station, a feeding and measuring system as well as a cutting machine.

  • Maximum cutting length 450 mm or 900 mm (with straight cut and depending on cutting machine type).
  • Material is passing through with grain side up.
  • Unwind station for rolls up to ø700 mm and a roll width of 310 mm or 610 mm (depending on type).
  • Automatic feeding and measuring system.
    Minimum cutting length
    Cutting machine type SGW = 100 mm
    Cutting machine type WSQ = 150 mm.
  • Guillotine cutting system or crush cut system for straight cut and/or wave cut with wave form type 20800.
  • The machine consists of an unwind station, a feeding and measuring system as well as a cutting machine.
  • Unwind station for rolls up to ø700 mm and a roll width of 310 mm or 610 mm (depending on type).
  • Automatic brake control type AV.
  • Pneumatically expandable unwind shaft for cores with ø75 mm.

Options:

  • Automatic edge guiding system – especially recommended for wave cuts.
  • Second unwind station for double layered cutting (depending on material).
  • Automatic feeding and measuring system (the material will be fed, not pulled).
  • Minimum cutting length of 100 mm with type SGW or 150 mm with type WSQ (the material must be as flat as possible).
  • Measuring accuracy approx. 1 mm or 0.1 % of the length.
  • Digital setting of length and number of cuts.
  • If bad material appears, the automatic operation can be stopped and the counting continues after the problem is solved.
  • For different joint directions (for example type AL and arrangement „R-4“.
  • Cutting angle adjustable between 90° and 45°.
  • Guillotine cutting machine type SGW
    – for straight cut (standard) or wave cut (optional).
  • Crush cut cutting machine type WSQ
    – for straight cut or wave cut
    – especially also suitable for non-woven material.
  • Maximum cutting length 450 mm or 900 mm (with straight cut and depending on the cutting machine type).
  • No stacking device.
  • Further information can be found on the separate flyer for knives, knife holders and fixed knife sets.

Options:

Joint directions type AL and AR

Joint directions type AL and AR seen from the grain side. Recommended: type AL

 

 

Arrangement possibilities cut-to-length machine type VM

L with operation side on the left. R with operation side on the right. Left/right refers to the direction on which the belt is pulled off.

  • Blade holder and blades for wave form (for cutting machine type SGW).
  • Automatic edge guiding system – especially recommended for wave cuts.
  • Second unwind station for double layered cutting (depending on material).

Video

How may we help you?

Contact us! Our experts will be happy to support you.

Tel. +41 52 720 70 30
info@amackerschmidag.com