Joint preparation

Joint preparation (Skiving)Joint preparation (Skiving)

Machines and plants for preparing the joints (skiving, scuffing, pointing, gluing, drying and tape application) of the endless narrow belt and wide belt production. The machines and plants can be equipped for the production of tape joints as well as overlap joints and are available as manual versions up to automated plants.

In addition to the conventional scuffing technologies, there is also the possibility of obtaining a homogeneous surface by using a sandblasting unit.

How may we help you?

Contact us! Our experts will be happy to support you.

Tel. +41 52 720 70 30
info@amackerschmidag.com

Skiving machine type SKZ

Skiving machine type SKZ
  • Maximum joint length 500 mm or 1600 mm
  • Mechanical or pneumatic clamping device
  • For max. 2 or max. 4 scuffing aggregates

Gluing machine type SKL

Gluing machine type SKL
  • Maximum joint length 500 mm or 1600 mm
  • Belt clamping
    Type SKL-500: without clamping device (mechanical clamping device available on request)
    Type SKL-1600: with pneumatic clamping device
  • Gluing aggregate with applicator roll width of 12 mm (others on request)

Continuously working lap preparation machine type 494

Continuously working lap preparation machine type 494
  • For tape joints and overlap joints
  • Material is passing through with grain side up or down
  • Several machine lengths for different number of aggregates
  • For narrow belts and wide belts in all common materials as well as non-woven material

Continuously working lap preparation machines with sandblasting unit

Continuously working lap preparation machines with sandblasting unit
  • For tape joints and overlap joints (depending on equipment and machine type)
  • Material is passing through with grain side up and/or down
  • For narrow belts and wide belts in all common materials
    (especially for woven material and polyester)
  • 2 or 4 sandblasting units with 3 nozzles each (depending on machine type)

Continuously working gluing machine type 494-LS

Continuously working gluing machine type 494-LS
  • For tape joints and overlap joints
  • For narrow belts and wide belts
  • With glue spray head and slowly rotating cover tape for an absolute precise adhesive application

Continuously working double lap skiving machine type ADSS

Continuously working double lap skiving machine type ADSS
  • For tape joints and/or overlap joints
  • Simultaneous preparation of both lap ends
  • For the production of narrow belts as well as wide belts
  • Can be upgraded to a automated plant

Special design: Double lap skiving machine type 215-DB

Special design: Double lap skiving machine type 215-DB
  • For tape joints and overlap joints
  • Simultaneous preparation of both lap ends
  • For skiving, scuffing, pointing, gluing, drying and tape application
  • For wide belts and segmented belts

Special design: Double lap skiving machine type 218-Z (twin plant)

Special design: Double lap skiving machine type 218-Z (twin plant)
  • For tape joints and overlap joints
  • Simultaneous preparation of both lap ends
  • Number of scuffing aggregates and gluing aggregates as required
  • For wide belts and segmented belts

Accessories: Aggregates

Accessories: Aggregates
  • Scuffing aggregates
  • Gluing aggregates
  • Drying stretches
  • Tape applicator