Belt slitter type BTB-262

The belt slitter type BTB is for a precise and fast slitting of belts.

The machine is able to slit short belts as well as very long belts, since it can be equipped with an automatic belt guiding system.

  • Maximum working width 310 mm, 460 mm, 610 mm.
  • Mechanical knife holder type KK as well as fixed knife sets.
  • For wave cut and straight cut.
  • Fast change between different cutting widths.
  • Cutting pressure pneumatically adjustable.
  • Cutting cylinder axially movable.
  • Number of cuts
    Type BTB-262/310: up to approx. 12 cuts (depending on the material)
    Type BTB-262/460: up to approx. 9 cuts (depending on the material) over the full width or up to approx. 12 cuts within 300 mm from the chassis
    Type BTB-262/610: up to approx. 6 cuts (depending on the material)
    over the full width or up to approx. 12 cuts within 300 mm from the chassis
  • Short belt stretcher (ø45 mm) with hand-operated belt guiding for belts of 480 … approx. 1800 mm. Including hand wheel for precise adjustment of belt position.
  • Horizontal belt stretcher with automatic belt guiding system for long belts including guiding for belts up to 6 m (can be extended on request). Minimum belt length 1200 mm.
  • Fixed speed approx. 0.6 m/sec (optionally with two-speed drive 0.6 and 1.2 m/sec).
  • Mechanical knife holder type KK-15-F for belts of 15 mm width and type KK-25-F for belts of 25 mm width.
  • Knife holders individually adjustable (positioning by hand lever).
  • Built-in scale on the machine.
  • Common pneumatic adjustment of the knives.
  • For wave cut and straight cut.
  • Further information can be found on the separate page for knives, knife holders and fixed knife sets.
  • Also suitable for very narrow belts.
  • With two knife set holders for inserting different knife sets.
  • Fast change between different knife sets.
  • For wave cut and straight cut.
  • Further information can be found on the separate page for knives, knife holders and fixed knife sets.
  • Short belt stretcher (ø45 mm)
    with hand-operated belt guiding for belts of 480 … approx. 1800 mm. Including hand wheel for precise adjustment of belt position.
  • Horizontal belt stretcher
    with automatic belt guiding system for long belts including guiding for belts up to 6 m (can be extended on request). Minimum belt length 1200 mm.
  • Cut end automatic type SEA
    Time-controlled cut end automatic to stop the cutting process when working with several identical belts. Especially suitable for high quantities.
  • Short belt stretcher (ø45 mm)
    with hand-operated belt guiding for belts of 480 … approx. 1800 mm. Including hand wheel for precise adjustment of belt position.
  • Horizontal belt stretcher
    with automatic belt guiding system for long belts including guiding for belts up to 6 m (can be extended on request). Minimum belt length 1200 mm.
  • Additional safety devices like safety fence around the machine as well as light curtain with beam spacing of 30 mm.
Horizontal belt stretcher with automatic belt guiding

Horizontal belt stretcher with automatic belt guiding

Cutting cylinder with automatic belt guiding and short belt stretcher

Cutting cylinder with automatic belt guiding and short belt stretcher

Knife holders

Further information for knives, knife holders and fixed knife sets.

Our recommendations

Knife holder trolley type MMW for all common mechanical knife holder type KK as well as fixed knife sets.

How may we help you?

Contact us! Our experts will be happy to support you.

Tel. +41 52 720 70 30
info@amackerschmidag.com